Trailer Hitches Hamilton Stoney Creek

Hamilton Trailer Hitches. You've come to the right place for trailer hitches and accessories. Premier Truck and Van will install fixed draw bar hitches to all makes and models.

Trailer hitches come in two main configurations: receiver type and fixed-drawbar type. Receiver-type hitches consist of a portion that mounts to the frame of the vehicle that has a rearward-facing opening that accepts removable ball mounts, hitch bike racks, cargo carriers, or other hitch mounted accessories. Fixed-drawbar hitches are typically built as one piece, have an integrated hole for the trailer ball, and are generally not compatible with aftermarket hitch accessories.

 


Class 1

$199.00

Starting at:

CURT's high-quality powder coat finish is applied after sending welded hitches through multiple stages, including a shot blast, wash and preparation system creating a smooth, clean surface. Each hitch is also dipped in liquid A-coat before it receives the powder coat finish. The two coatings cure together in the finishing oven providing the most rust and chip resistant hitch available. Class 1 trailer hitches have a 1-1/4” receiver opening, and rate up to 2,000 lbs. gross trailer weight (GTW) and 200 lbs. tongue weight (TW).

Class 2

$225.00

Starting at:

CURT's high-quality powder coat finish is applied after sending welded hitches through multiple stages, including a shot blast, wash and preparation system creating a smooth, clean surface. Each hitch is also dipped in liquid A-coat before it receives the powder coat finish. The two coatings cure together in the finishing oven providing the most rust and chip resistant hitch available. CURT’s class 2 trail hitches have a 1-1/4” receiver opening, and rate up to 3,500 lbs. gross trailer weight (GTW) and 350 lbs. tongue weight (TW).

Class 3

$245.00

Starting at:

CURT's high-quality powder coat finish is applied after sending welded hitches through multiple stages, including a shot blast, wash and preparation system creating a smooth, clean surface. Each hitch is also dipped in liquid A-coat before it receives the powder coat finish. The two coatings cure together in the finishing oven providing the most rust and chip resistant hitch available. All CURT hitches come with mounting hardware and easy to follow installation instructions. Our class 3 trailer hitches have a 2” receiver opening, and rate up to 4,000 lbs. gross trailer weight (GTW) and 400 lbs. tongue weight (TW).

Class 4

$349.00

Starting at:

CURT's high-quality powder coat finish is applied after sending welded hitches through multiple stages, including a shot blast, wash and preparation system creating a smooth, clean surface. Each hitch is also dipped in liquid A-coat before it receives the powder coat finish. The two coatings cure together in the finishing oven providing the most rust and chip resistant hitch available. All CURT hitches come with mounting hardware and easy to follow installation instructions. Our class 4 trailer hitches have a 2” receiver opening, and rate up to 10,000 lbs. gross trailer weight (GTW) and 1,000 lbs. tongue weight (TW).

Commercial Duty

$499.00

Starting at:

New for 2013 are CURT's upgraded Commercial Duty (CD) trailer hitches and the addition of Commercial Duty+ (CD+) high capacity trailer hitches. CURT has increased towing and tongue weight carrying capacities of our CD hitches. CD+ hitches have even higher capacity ratings. CURT Manufacturing focuses on being first-to-market with our new custom fit hitch designs. CURT's high-quality carbide powder coat finish is applied after sending welded hitches through multiple stages, including a shot blast, wash and preparation system creating a clean surface. Each hitch is also dipped in liquid A-coat before it receives the powder coat finish. The two coatings cure together in the finishing oven providing the most rust and chip resistant hitch available. CD CURT hitches come with strong, grade 8 mounting hardware and easy to follow installation instructions. CD and CD+ trailer hitches have a 2 1/2 IN receiver tube opening, and rate up to 20,000 lbs. gross trailer weight (GTW) and 2,700 lbs. tongue weight (TW).

Bumper Mount

$99.99

Starting at:

CURT bumper mount trailer hitches bolt to the bottom of the pickup step bumper. They offer a lower hitch point to provide level trailer towing. Mounting hardware is included and there are safety chain hook-ups. Tow capacities of 4,000 or 5,000 are available with 2” x 2” ID receiver hitch box. Dodge bumper hitch fits flush to the factory bumper of late model Dodge truck. GM/Ford bumper hitch require no alterations to the vehicle. CURT’s RV bumper hitch has tow capacity of 3,500 lbs and fits either 4” square channel bumpers or 2” x 4” channel bumpers.

1-1/4" Ball Mount

$39.95

Starting at:

CURT Ball Mounts are a step above the rest. CURT has invested in the technology necessary to produce a full line of exceptionally strong and attractive balls mounts. The line of ball mounts is robotically welded to ensure accurate, consistent cuts and clean, strong weld lines. Once welded, these mounts undergo a process that creates a flawless surface for the application of highly durable CURT powder coat finish. Class 1 and 2 Ball Mounts are for 1 1/4 IN x 1 1/4 IN receiver tubes.

2" Ball Mount

$24.99

Starting at:

CURT Ball Mounts are a step above the rest. CURT has invested in the technology necessary to produce a full line of exceptionally strong and attractive balls mounts. The line of ball mounts is robotically welded to ensure accurate, consistent cuts and clean, strong weld lines. Once welded, these mounts undergo a process that creates a flawless surface for the application of highly durable CURT powder coat finish.

2-1/2" Ball Mount

$129.95

Starting at:

CURT Ball Mounts are a step above the rest. CURT has invested in the technology necessary to produce a full line of exceptionally strong and attractive balls mounts. The line of ball mounts is robotically welded to ensure accurate, consistent cuts and clean, strong weld lines. Once welded, these mounts undergo a process that creates a flawless surface for the application of highly durable CURT powder coat finish. CURT 2 1/2 IN ball mounts have a towing capacity of 15,000 - 18,000 Lbs.

1-7/8" Trailer Ball

$10.99

Starting at:

CURT trailer balls are engineered to the highest quality & specifications for fit, performance and endurance, with a quality finish and fine threads for more holding strength. They all meet the U.S. V5 specifications and are tested for your safety. Raw, chrome or stainless. CURT offers a large selection of trailer balls and accessories, available in multiple sizes, ratings and threads.

2" Trailer Ball

$12.99

Starting at:

CURT trailer balls are engineered to the highest quality & specifications for fit, performance and endurance, with a quality finish and fine threads for more holding strength. They all meet the U.S. V5 specifications and are tested for your safety.

T-Connector

$59.95

Starting at:

CURT T-Connectors offer a plug-n-play solution to splicing and soldering for a huge selection of applications for almost every manufacturer. They employ SMT (surface mount technology) and circuit protection which ensures quality, endurance and worry –free towing. CURT T-Connectors come with a dust cover to keep your connector clean when it’s not in use.

Lock

$19.99

Starting at:

Ensure your ball mount isn’t stolen with a hitch lock. Made with a water-tight dust caps and includes 2 - 4 keys, depending on product. Choose from chrome, black, or stainless steel finishes. When you’re out on the boat, camping, or riding your ATV; you’ll want your trailer protected.

Hitch Pin & Clip

$5.99

Starting at:

To secure ball mounts and accessories to receiver hitches, you’ll need CURT pin & clips. Pins have a 105 degree bend at the handle for easy operation. CURT pins & clips are made from solid steel and are available in zinc, black zinc, chrome or stainless finish. CURT offers pin & clips for 1/2”, 5/8” or universal pin & clips that fit 1 1/4” and 2” tubes.

Brake Controller

$64.99

Starting at:

LED indicator lengthens as controller applies force. Mount anywhere in vehicle. No leveling required. No internal moving parts. Adjustable power and ramp time. Compatible with anti-lock brakes & cruise control. Operates 2-6 brakes. Mounting hardware included